15
Programmable Items
Programmable Items
Compression
Input level increase of 30 dB above knee of compression causes < 3 dB output
increase
Guard Tone
2100, 2175, 2325, 2600, 2800, 2970 Hz. Guard tone notch will follow
High Level Guard Tone
Duration
120 mSec default, selectable 0-900 mSec. Tx audio delay will follow
Low Level Guard Tone
Duration
Continuous during transmit
Function Tone Duration
40 mSec default, selectable 0-250 mSec. Tx audio delay will follow
Clock Display
On/Off, 12/24 hour format, time set, Displays Hours:Minutes
VU Meter Display
On/Off, two styles available, Normal or Precise
Function Frequencies
650, 750, 850, 950, 1050, 1150, 1250, 1350, 1450, 1550, 1650, 1750, 1850, 1950,
or 2050 Hz
Monitor Frequency
Any function frequency
PL Strip Frequency
Any function frequency
Function Keys
9 programmable keys may be assigned specific functions, the 4 keys in the top
row include green and red LEDs to indicate selected status, they would typically
be used when more than four frequencies (F1-F4) are required, the 4 keys in the
second row include single red LEDs to indicate status, different function tones
may be sent "toggle" keys such as Coded/Clear, the LED shows the current
selected function
Programmable Keys #1
through #4
Can be programmed as: No function, Single Frequency select (F2), Double
Frequency select (F3/F4), Coded/Clear, Intercom, Privacy, Repeat On/Off, Rx2
Mute On/Off, PL1, PL2, PL3, PL4, Wild I, Wild II, Supervisor takeover, Mute, 1
kHz Alert, 5-beep Alert, High/Low Alert, Siren Alert, Fast-Siren Alert, Instant
Call, Off-hook Speaker Mute, Hook Disable, Call Decoder Mute, Unselect Mute
(Model 284 only)
Programmable Keys #5
through #8
Can be programmed the same as keys 1-4, except that they cannot support Double
Frequency select.
Programmable Key #9
(located above Transmit
key)
Can be programmed as: Monitor, Page Send, or any other non-Frequency select
function
Line Select Keys
The Model 284 has four line select keys located between the programmable
function keys and the paging keypad. Each key has both a green and a red LED for
status indication. Green is the selected line on that remote. Flashing red indicates
Vox activity on a line. Rapidly flashing red indicate the Call Decoder has been
triggered. Solid red indicates that the station controlled by a line is actually in
transmit.
Rx Audio Delay
On/Off. Mute function tones from parallel remotes
Tx Audio Delay
On/Off Allows user to begin speaking while the function tones are sent
