background image

 

30

GETTING TO KNOW THE TRACTOR 

E123 E124 

 

FAST COOLING OF THE CABIN 
SPACE 

1.  Turn the heating valve control (A) to 

the left. 

2.  Set the air circulation in the cabin 

control (D) to inner recirculation.  

3.  Select the desired speed of the fans 

(position 1, 2, 3) using the fan control 
(B). 

4.  Switch of the A/C system using the 

button (C). 

5.  Adjust angles of the air outlets to pre-

vent direct blowing of persons in the 
cabin (risk of an disease due to 
intensive cooling of body parts). 

 
 

OPERATION OF HEATING OF AIR-
CONDITIONING WITH WORK OF THE 
TRACTOR 

In case that inner recirculation is activa-
ted, fresh air supply is closed and all the 
air in the cabin becomes breathed up. 
This situation may cause a feeling of fa-
tigue. 
Note: When working with the tractor, set 
the control (D) to fit your individual requi-
rements for temperature, i.e. between 
positions (a) and (b) so that the fan will 
suck outdoor air through the filters. 
 
 
 
 
 

 
 
 

When spraying pesticides and 
using the heating filter with active 
carbon, the re-circulation control-
ler should be in position “air is 
drawn into from the outside” and 
the fan controller should be in the 
position “fan maximum work” to 
create overpressure in the cabin. 

 

 
 
 
 
 
 
 

 

 

 

 
 
 
 
 
 

Summary of Contents for Proxima Plus 85






































































































































































































Reviews: