Zetor PROXIMA PLUS 2011 Series Operator'S Manual Download Page 94

Page: 94 / 204

HYDRAULIC SYSTEM

P+11N018

DIFFERENT FUNCTIONS OF OUTER HYDRAULIC CIRCUIT CONTROL LEVERS

There are four positions of the lever (b):

- Neutral position. Quick coupler drives (3) and (4) are closed and oil in the hydraulic appliance connected is blocked. Lever

(b) is locked in this position.

- Pressure in quick coupler (3). Quick coupler (4) is connected with the drain. It is necessary to hold lever (b) in this position,

when released, lever (b) automatically returns to (N) position. In addition, quick coupler (3) is equipped with a one-way

valve – convenient for connecting a tool which requires higher degree of impermeability – minimum lowering of the tool

during transport.

- Pressure in quick coupler (4). Quick coupler (3) is connected with the drain. Lever (b) is locked in this position.

- Floating position. Both quick couplers (3) and (4) are connected with the drain and oil is free to flow in both directions.

Lever (b) is locked in this position.

Summary of Contents for PROXIMA PLUS 2011 Series













































































































































































































Search results

Summary of Contents for PROXIMA PLUS 2011 Series

Reviews:

Related manuals for PROXIMA PLUS 2011 Series

Brands by name

Popular brands

Zetor PROXIMA PLUS 2011 Series, Operator'S Manual

Search results

Summary of Contents for PROXIMA PLUS 2011 Series

Reviews:

Related manuals for PROXIMA PLUS 2011 Series

Brands by name

Popular brands