Zetor HORTUS HS Series Operator'S Manual Download

Page: 54 / 142

Foot Operated Accelerator

Parking Brake

Important:

Traveling with the park brake on will damage the brakes.

Parking Brake Lever

Note:

The brake discs can be worn prematurely if driving the vehicle with the parking brake engaged

partially.

This pedal can override a fixed hand throttle setting.

- Acceleration Pedal

HODP058

1. Pull the Lever fully up to engage the park brake.
2. Press the button on the end of the lever and lower

the lever to release the brake.

- Parking brake Lever

HODP059

1. With the left and right brake pedals interlocked,

depress the brake pedal with a right foor firmly and

pull up the parking brake lever to lock the pedals.

2. To release the parking brake, depress the brake

pedal firmly.

- Parking brake lever

HODP060

DESCRIPTION OF TRACTOR CONTROLS

Summary of Contents for HORTUS HS Series















































































































































Search results

Summary of Contents for HORTUS HS Series

Reviews:

Related manuals for HORTUS HS Series

Brands by name

Popular brands

Zetor HORTUS HS Series, Operator'S Manual

Search results

Summary of Contents for HORTUS HS Series

Reviews:

Related manuals for HORTUS HS Series

Brands by name

Popular brands