Zetor 86 41 forterra turbo, Operator'S Manual

Page: 215 / 257

215
SCHEDULED TECHNICAL MAINTENANCE
TRACTOR INSPECTION AND MAINTENANCE
After accomplishing every … Op
Inspection and maintenance operations
10 70
100 300 600
1 200 1 800 2 400 3 000 3 600 4 200 4 800 5 400 6 000
HYDRAULIC SYSTEM
Greasing of the additional hydraulic cylinder pins X Every 300 Oh
Greasing of the threads of the L.H. and R.H lifting tie rods with CBM grease X Every 300 Oh
Greasing of the front three-point hitch X X X X X X X X X X
Inspection of the front three-point hitch outer hydraulic circuit joints for tightness X X X X X X X X X X
Inspection of the individual hydraulic systems for tightness and operation X X Every 300 Oh
BRAKE SYSTEMS
Inspection of the amount of braking liquid and the tightness of hydraulic brakes X Every 10 Oh
Inspection of the pneumatic brakes for tightness and trailer brake efficiency X Every 10 Oh
Inspection of the foot and parking brakes for proper operation and setting-up X X X X X X X X X X
Setting-up of the pneumatic brake X X X X X X
Setting-up of the hydraulic brake system components X X
Discharge of condensate from the air storage tank through the drain valve X X X X X X X X X X
Greasing of the sliding surfaces of all the parts of pneumatic instruments X X
5
Replacement of rubber components in the brake system X X
6
Revision of the air storage tank X X
ELECTRICAL SYSTEM
Inspection of charging process for proper operation X Every 10 Oh
7
Inspection of the electrical equipment and accessories for proper conditions and
operation
X X Every 300 Oh
Inspection of the charging voltage X X
8
Inspection of the electrolyte for level in the storage battery X X Every 200 Oh