The use of safety guidelines
*
For your safety, please read these operating instructions carefully before using ZETLIGHT
NANO LED Lighting System.
*
NEVER LOOK DIRECTLY AT THE LEDS. Light emitted from LEDs may cause eye and/or
skin damage not covered by ZETLIGHT. UV and Invisible Radiation (IR) emitted from this
product can case permanent damage. Always minimize exposure to eyes and skin.
*
A drip loop must be used with all electrical aquarium devices. A drip loop is a self-made part
of the cord hanging below the receptacle. (See Fig. 1)
*
If you wrong operation caused personal safety and equipment damage, our company will be
no responsible for it.
*
Check the power cord, plug and socket are intact.
*
Before your wiring, please read the state and local laws, make sure to use a compliant
power adapter.
*
To commission a qualified person for the wiring installation.
*
To fix the light fixture reliably and steadily.
*
Do not place anything on the product.
*
Avoid objects into the product. Keep the slot and ventilation opening clean, they should not
be blocked and covered.
*
Please do not splash water on it, and do not put it into water.
*
If the light fixture/power supply are damaged, please repair or replace it by professionals.
Hardware assembly & installation
Required tools
Flathead Screwdriver with small tip
1.Attach the Mouthing Bracket to the LED Housing with the Mounting Screws. Use a small
Flathead
Screwdriver to fasten and tighten down the Mounting Screws.
2.Attach the Mouthing Bracket and LED Housing to the chosen aquarium panel with Mounting
Bolts.
Fasten and tighten down the Mounting Screws by hand.
3
.
Please unplug the battery protection part before you use the remote controller
Getting Started
Thank you for choosing ZETLIGHT NANO series
as your LED lighting system
1
3
ZETLIGHT
NOTE
:
If
extra
Mounting
Bolts
and
/
or
Screws
are
included
,
please
save
as
re
-
placement
parts
.
Package content
2
ZETLIGHT
1
2
3
4
5
6
Parts diagram
1
.
LED
Housing
2
.
Power
Source
3
.
Mounting
Bracket
4
.
Mounting
Bolts
x
2
5
.
Mounting
Screws
x2
Infrared remote
controller
6
.
Parts list
Please check the content in the package
