3/3
2.
SERVICE AND REPAIR
-
Remove the valve from the line;
-
Remove the screws from the cover ( n°5);
-
Remove the cover ( n°2);
-
Take out the O-ring (n°4);
-
Remove the ball (n°3)
For bigger sizes, turn the body (n°1) by 90°, to remove the ball
RECOMMENDATIONS
-
before carrying out maintenance or dismounting the valve:
-
be sure that the pipes, valves and fluids have cooled down,
-
decrease the pressure and drain the lines and pipes in case of
toxic,
-
corrosive, inflammable or caustic liquids.
Temperatures above 50°C and below 0°C might cause damage to people.
.
7. VALVE SERVICE DISCOUNTINUITY
All obsolete and dismantled valves must not be disposed with houshold waste. ZETKAMA valves are made
of materials which can be re-used and should be delivered to designated recycling centres.
8. WARRANTY TERMS
- ZETKAMA grants quality warranty with assurance for proper operation of its products, providing that
assembly of them is done according to the users manual and they are operated according to technical
conditions and parameters described in ZETKAMA’s catalogue cards. Warranty period is 18 months starting
from assembly date, however not longer than 24 months from the sales date.
- warranty claim does not cover assembly of foreign parts and design changes done by user as well as natural
wear.
- immediately after detection the user should inform ZETKAMA about hidden defects of the product
- a claim should be prepared in written form.
Address for correspondence :
ZETKAMA S.A.
ul. 3 Maja 12 57-410
Ś
cinawka
Ś
rednia
Phone (0048) (74) 8652100
Fax (0048) (74) 8652101
Website: http:// www.zetkama.com.pl