ZEC-DOC-USER-MANUAL-MIZ-21C (180 - 1030496 - 1 - A) - 1
Page 7
Connector Panel
The connectors accept a broad line of probes
supplied by Zetec. The connector is designed for
easy connection and retention of the probe
connector during operation. Gently insert the
probe connector into the MIZ-21C by aligning the
red dots and inserting until seated. To remove the
connector, grasp the probe connector housing by
the no-slip surface and gently pull to release the
latch and allow the connector to be removed
The charging port is to attach the power
adapter supplied with the MIZ-21C. The
charging port can be used to recharge the
internal batteries as well as powering the
instrument for longer term operation or when
the battery level is lower than is required for
the inspection.
The USB connector can be used to attach
peripherals such a mouse, keyboard,
headphones, or storage device. The USB
connector also supports the connection of a
USB hub so several peripherals can be
connected at once.
C
AUTION
!
Charging Port
MIZ-21C shall only be connected to the supplied power adapter and cables for
charging and/or operating. Use of an improper power adapter may result in loss
of data or damage to the instrument.
Eddy Current Array Connector
USB & Charging Ports
Eddy Current Connector
Charging
Port
USB 2.0
