SIMPLICITY INSTALLATION MANUAL.
Software:PANEL:R1107 & LOOP:R1062
Approved Document No: GLT.MAN-107
PAGE 16
Issue : 2.00 Authorised: GH Date: 4/06/2007
Fault Output
(FAULT): Gives 24V in the quiescent condition, and 0V in a fault condition. This ensures failsafe
operation even in the event of total power loss. More than one relay can be connected to this output if required.
Typical auxiliary output wiring
Trigger I/P
FLT REP
+
RE
LA
Y O
UT
PU
T
N
O
C
M
N
C
RELAY
FAULT
INDICATION
DEVICE
FIT BACK-EMF
DIODE ACROSS
RELAY COIL
+
Trigger I/P
RELA
Y OU
TP
UT
NO
CM
NC
RELAY
AUTODIALLER
FIT BACK-EMF
DIODE ACROSS
RELAY COIL
The termination for the above inputs must be as indicated on the main PCB (See page 31). The Earthing of the
cable screens should be as shown on page 17.
The fault relay is used to
connect to a remote
indication device
The fire relay can be used to connect
to various devices which are activated
on a fire alarm. Eg. Auto dialer ,
magnetic door release (24V), sprinkler
system etc.
