PREMIER QUATRO ZT-TSRI Installation Manual Firmware Version: 2_0z3
4
Doc No: GLT-281-7-1 Issue: 1.1 Author: TE DATE: 16/11/2016
ICP-DAS Wiring
Full manual here:
ftp://ftp.icpdas.com/pub/cd/8000cd/napdos/7000/manual/7520.pdf
If No ICP-DAS is used:
The connection to be made between the QT-NC Modbus and ZT-TSRI (repeater) are as follows:
The USB A to serial converter can then be inserted into any of the 4 USB slots on the ZT-TSRI.
2.3 Connection to a Screen/Monitor
The ZT-TSRI can be connected to either a touch screen monitor/interface or a regular PC
monitor/TV (can only be used with a USB mouse & keyboard with this option). It needs to be
connected via its HDMI port located next to the micro USB port.
Note: When looking at the
QT-NC, if the Modbus red LED
is flashing, then it indicates
that there are comms being
sent / received.
(USB TO
SERIAL
ADAPTER)
(QT-NC
Modbus
RS485)
(
Cannot
be
powered from
the Quatro 24v
AUX supply)
