INFINITY ID2 INSTALLATION MANUAL.
Software Versions: PANEL 1.N & LOOP O.N
Approved Document No: GLT-211-7-1
Issue 1.9 Author: MG/NJ Date: 06/04/2016
PAGE 29
14 RESTORING THE PANELS DEFAULT SETTINGS
Because the ID2 allows several configuration changes, we have also included
an option to reset the panel back to its default operation. From Engineer Menu 2,
Select Option 6 (Misc).
Then from the System Menu, Select option 6 (Reset). This brings up the screen to
select to reset :-
The panel can be reset as follows:-
Option Item
Function
1
Logs
Clears event log (Note that the Event counter is not reset) (Code 159 to reset)
2
Factory
Sets the panel back to factory default (Code 159 to reset)
NOTE: The factory reset option does not delete any panel name that has been programmed into the panel. To
clear any programmed name, follow the steps in section 12.3, and use the cancel button to delete all text.
Reset Settings
1: Event Logs
2: Factory Reset
Misc Settings
1: Language
2: Version
3: Topology 6: Reset
