Zeta Alarm Systems SIMPLICITY PLUS Manual Download Page 10

Page: 10 / 10

SIMPLICITY PLUS / SIMPLICITY MICRO – ADDITIONAL FEATURES.

Software Version :PANEL-R6180 (Plus) R5780 (Micro)

Approved Document No: GLT.MAN-139

PAGE 9

Issue 1.00 Authorised: GH Date: 02/06/2010

10 VIEWING PANEL INFORMATION

10.1 Menu Structure

To help locate the different features available, the menu structure of the simplicity panel is shown here.

MENU LAYOUT
MAIN MENU

SUB MENU 1 SUB MENU 2

DESCRIPTION

CONFIGURATION MENU 1

– THE USER MENU

1:Loop Contents

View quantity of each device type configured on
the loop

2:Device Status

View the status of an individual device (Status

–

normal/fault/alarm, Analogue value, device label

3:Event logs

VIEW EVENT LOG

1: Alarms

View all fire alarm events

2: Faults

View all fault events

3: System

View all other events (eg keyswitch on, menu
access, clock change, etc)

4: All

View all events

CONFIGURATION MENU 2

– THE ENGINEER MENU

4:Configure Loops

Configure the loop

5:Edit Device

Edit device label (press enter for cursor)
Turn on detector LED
Ring associated sounder
Select alarm verification
Turn off associated sounder at this address
Disable this device.
Select specific I/O Operation for an I/O unit

6:Config System System Menu

1: Clock

Adjust time & date

2: Zones

Change zone boundaries

3: Alarms

Alarm Operation

1: Det

Choose detectors to cause zonal alarm or
common alarm for sounders

2: MCP

Choose MCP to cause zonal alarm or common
alarm for sounders

3: SOUNDER

Select if the sounders have a zonal to common
time out when triggered zonally

4: Bases

Select if associated sounder bases work
common or zonal

5: I/O

Select default I/O type

4: Timing

Alarm Timing

1: Zonal to Common

Select the delay for all the sounders to operate
after a zonal alarm

2: Alarm Verify

Select alarm verification time

5: Misc

Misc Settings

1: Language

Select LCD language

2: Version Info

Displays the firmware versions

6: Reset

Reset Settings

1: Logs

Erases event logs

2: Zones

Resets the default zone boundaries

3: Panel

Resets panel to default alarm & timing settings

4: Devices

Erases loop contents from memory, clears
device labels, resets verification & sounder base
settings to default.

6: All

Resets all configuration settings, but preserves
event log.

Summary of Contents for SIMPLICITY PLUS











Search results

Summary of Contents for SIMPLICITY PLUS

Reviews:

Related manuals for SIMPLICITY PLUS

Brands by name

Popular brands

Zeta Alarm Systems SIMPLICITY PLUS, Manual

Search results

Summary of Contents for SIMPLICITY PLUS

Reviews:

Related manuals for SIMPLICITY PLUS

Brands by name

Popular brands