ADDRESSABLE
FIRE ALARM PANEL
ci
i
m
p
l
i
S
y
t
Micro
INSTRUCTION MANUAL: 32 Device,4 Zone Addressable Fire Alarm Panel
Approved Document No: GLT.MAN-129
PAGE 9
Issue : 1.0 Author: NRPJ Date: 11/04/2008
Controls
The Simplicity Micro has the following controls:-
BUTTON LABEL
USE
START/STOP
Used to silence the sounders in an alarm, or to manually start the
sounders to evacuate building
SILENCE FAULT TONE
Used to silence the panel`s internal buzzer in a fault or alarm
condition.
RESET
Used to return the panel to its normal condition after an ALARM
condition. All faults (except power faults) can also be reset, but
they will return if the source of the fault remains. (Faults are non-
latching so will clear by themselves when the fault has been
cleared)
LED TEST
To check that all indicator LEDs are working. Use as part of the
daily / weekly fire alarm inspection.
NEXT
Used to display the Next message (or next event in log) in LCD
PREV
Used to display the Previous message (or Previous event in log)
in LCD
GENERAL TEST
Used to initiate test mode
GENERAL
DISABLEMENT
Used to initiate zone disable mode
0 TO 9
Used to enter access code, and device description
ENTER
Used to confirm actions
CANCEL
Used to cancel actions (and delete in text entry)
Note that the controls can only be used after the first access code has been
entered.
Enabling the controls.
Press enter.
The panel now prompts enter access code
Enter the code 123
The screen returns to its previous contents, but now access on LED is lit.
Entering Configuration Menu 1 (User menu)
If the system normal screen is showing, just press enter
If a fault or fire is showing, press enter (to display details), then cancel. This
returns the user to the menu.
Entering Configuration Menu 2 (Engineer Menu)
From Configuration Menu 1, press the NEXT button by the LCD Screen.
The panel now prompts enter access code
Enter the code 369
The panel will now display Configuration Menu 2
