Please take a few moments to check all pack contents listed on page 1 of the
Assembly Instructions.
Please contact “Zest4Leisure” directly if any of the pack contents are damaged
or missing. Contact telephone: 01352 752 555 Option 1 or email:
[email protected]
Assembly requires 2 persons. All screw holes to be pre-drilled.
Tools required: Corded/Cordless Drill, Pozidrive Bit/Screwdriver, 3mm Drill Bit.
Oxford Planter is now complete.
1.
Locate Side Panels (B) into slots in Front Panel (A). Fix in position using 4no
90mm screws. See Fig 1a & 1b.
2.
Locate Back Panel (C) onto side panels (B) and fix in position using 4no 90mm
screws. See Fig 2a & 2b.
3.
Position Base Panel (D) as shown in Fig 3a and fix through battens using 6no
50mm screws. See Fig 3a & 3b.
