P.T.O.
See Swing Hammock Bench Instructions.
1) Interlock bench back (8) and bench (9), align bolt holes and fix using 6no
M8 x 45mm bolts (E). NB Do not fully tighten nuts at this stage.
2) Assemble connection braces (11) to arm rests (10) as per diagram, by
locating dowels and pre- drilled holes, and secure using 2no 4x50mm screws
(A).
––
3) Attach the arm rests to the bench assembly using 4no M8 Eye bolts (G)
nuts and washers. Fully tighten all nuts on bench assembly at this stage.
4) Pass narrow link on long front chain (I) through hole in armrest and attach
to front eye bolt using shackle (J). Attach short back chain (H) to back eye bolt
using shackle (J). Repeat for opposite side of bench.
5) Hang bench assembly from swing hangers (F) using 2no spring hooks (K).
Ensure that chains hang freely i.e. no twists.
The assembly is now complete.
Summary of Contents for HOLLYWOOD SWING
Page 4: ...F i g u r e 1...
