ZEROXCLUB Instructions Manual
3
CHARGE THE BATTERY
Use your existing USB charging port to initially charge your device
before you install it on your vehicle and charge it when needed.
1. Connect the included USB cable to the Micro USB port of the
camera.
2. Plug the USB cable into the USB wall charger with an output
rating of 2000MA or higher. The red indicator light char will
illuminate when charging.
3. Charge for 12 hours.When charging is complete, illumination of
the red indicator light will be off.
4. Close USB door securely to ensure waterproof integrity.
Camera Status Light Quick Reference
The green working indicator light flashes 5 times and then turns off. Camera
and monitor enters standby mode.
The green light flashes until pairing success is complete
While the monitor is showing the camera image, the green working indicator
light will remain solid.
The red light is on when the camera is charging and goes off when the camera
is fully charged.