ZEROXCLUB INSTRUCTIONS MANUAL
2
2 Installation instructions
The system components are designed to be assembled without difficulty
and with simple tools.
2.1 Installation Safety Precautions
•
Use the correct size cable and connector to power the rear camera.
•
Ensure the power supply circuit has circuit protection.
•
Connect the rear camera to a 12-24V DC circuit only.
•
Use insulated tools when working with power supply.
•
Use correct safety equipment when working at elevated levels.
•
Ensure the correct polarity of the 12 V DC power supply going to the
camera.
Red = Positive.Black=Negative.
•
Do not allow water to enter the LCD Display.
•
Excessive heat can be caused by a loose connection.
2.2 Make an Installation Plan
We recommend that you make a plan before you begin the installation of
your system components. This approach will eliminate the likelihood of
running into problems with cable routing, camera mount locations, and
power supplies.
* Please test the system before installation with temporary mounting and
wiring to make sure it can work well. (The method of powering the
monitor and cameras refers to
2.5
)
2.2.1 Suggested System Installation Sequence
Based on our experience, we recommend that you follow this installation
sequence:
Assemble Installation Tools
Install the Monitor
Connect the Power Supply
Connect the Red and Black Wire(s)
