The Zeroplus Logic Analyzer
Installation Guide
The Zeroplus Logic Analyzer Installation Guide
Page 19
3 Introduction to Logic Analysis
Chapter 3 gives detailed instructions in performing two basic analysis operations
and five advance analysis applications with the Logic Analyzer. The basic analytical
operations are the Logic Analysis and the Bus Analysis, which are fundamental to all
further applications.
3.1 Logic
Analysis
Logic Analysis is meant for a single signal analysis. Section 3.1 gives detailed
instructions on the software’s basic setup.
Basic Software setup of the Logic Analysis
Task 1. Clock Source (Frequency) and RAM Size set up
Step 1.
Click
icon or Click Sampling Setup from Bus/Signal on the menu bar,
the dialogue as shown in Fig 3-1 will appear.
Fig 3-1 – Clock Source
Summary of Contents for LAP-16128U
Page 1: ......
