Options - Sound Attenuation Kit & Balloon Guard • 37
OPTIONS
Prior to assembling and attaching the sound attenuation kit, all of the condensing unit electrical and refrigeration connections should be
completed. The condensing unit must then be squared up in relationship to the case.
SOUND ATTENUATION KIT INSTALLATION SEQUENCE
1. Install angle brace with 2-3 #8-18 x 1/2 hex tek screws (provided).
2. Install large pre-cut insulation U-box and form to shape. Orientate
with corner cutout notch for refrigeration piping quick connections
to rear of case.
3. Position large 1-piece baffle with coil opening cut out in front of
U-shaped box. Secure in place with brace.
BALLOON GUARD INSTALLATION SEQUENCE
1. Install balloon guard metal screen at an angle using (5) Bracket
U-clips and screw #10 x 3/4" tek. Guard angle might vary
depending on height of insulation components.
2. Secure the metal screen to the case ceiling with
(3) #8-18 x 1/2" hex, tek screws.
3. Make necessary adjustment to metal screen to fit properly.
For more detailed instructions, please contact Zero Zone.
Sound Attenuation Kit Exploded View
Sound Attenuation Kit Assembled
Sound Attenuation Kit & Balloon Guard