26 • Maintenance - Wire Shelf Installation & Removal
MAINTENANCE
Wire Shelf Installation & Removal
INSTALLATION: Determine the correct bracket and shelving location. While lifting the front of one bracket up at a slight angle, insert the shelf
bracket tangs into the slots in the shelf standard at the back of the case. Continue lowering the shelf bracket until the shelf bracket is held
securely by the standard. Repeat the process for the opposite shelf bracket. Make sure the shelf brackets are level left to right. Place rear of
shelf down and onto the rear of the shelf brackets. Swing the front of the shelf down until securely held by both shelf brackets.
REMOVAL: Lift the front of the shelf and then the rear of the shelf. Tilt the front of the shelf bracket up and pull out until the shelf bracket tangs
clear the shelf standard. Repeat the process for the opposite shelf bracket.
