Zero Motorcycles S 2009, Owner'S Manual

Page: 22 / 50

2009 ZERO S / DS OWNER'S MANUAL
20
Note that the motorcycle must be plugged in for the charger’s indicators to illuminate.
See page 12, item 7 for location.
OPERATION ONBOARD CHARGER LED INDICATORS
Ammeter
(Amber)
Solid:
Flashing:
Displays approximate scale of current output during bulk phase.
High internal charge temperature. Current output reduced
Also displays algorithm #1-6 for 11 seconds if no battery is connected.
80% Charge
(Amber)
Solid:
Flashing:
Bulk charge phase complete, 80% charged. In Absorption phase.
With no battery connected, indicates algorithm # selected by number of flashes.
100% Charge
(Green)
Solid:
Flashing:
Charging complete. Charger in Maintenance Mode.
Absorption phase complete. In Finish phase.
AC On
(Amber)
Solid:
Flashing:
AC Power good.
Low AC Voltage, check voltage and extension cord length (max 25ft, 12 AWG).
Fault
(Red)
Flashing: Charger error. Reset charger power and refer to Troubleshooting.
Power Pack LED Indicator Diagram
O
P
E
RA
TI
O
N