Zero Motorcycles 2009 DS, Owner'S Manual

Page: 20 / 50

2009 ZERO S / DS OWNER'S MANUAL
18
OPERATION GENERAL OPERATION
BASIC OPERATION
Before operating the Zero S/DS motorcycle, check the following to make sure the motorcycle is secure
and intact.
Z-FORCE POWER PACK
Make sure the onboard energy gauge has solid bars to the top, indicating a charged Zero S/DS power pack.
If the energy gauge reads below 6 bars (
1
/
2
), we suggest you recharge before use.
DRIVE CHAIN
Check chain slack and condition. Adjust and lubricate if necessary. The drive chain must be cleaned and
lubricated at the intervals specified in the maintenance schedule; otherwise it will quickly wear out, especially
when riding in dusty or wet areas.
BRAKE
Squeeze the brake lever and push the motorcycle to see if it rolls. You should be able to lock-up the wheels up
completely using the brakes. Check for sufficient brake fluid in the reservoir.
THROTTLE
While the motorcycle is “OFF,” apply the throttle and release to verify that the throttle is smooth and the return
works properly.
TIRES
Check both tires for condition and tread depth. Check cold tire pressure frequently. Check for damage and
alignment. Maintain correct tire pressure as specified on page 23. Replace the tires when the tread height is
2mm or less.
ELECTRICAL SYSTEM
Check correct functioning of headlamps, tail-lights, brake lights, turn indicators, control lamps and horn while the
motorcycle is on. Do not affix any type of tinted film or stickers to the headlight lens.
O
P
E
RA
TI
O
N