4
Inspection prior to each use or daily inspection
DO NOT
use the equipment if any bolts or nuts are missing or loose.
ALWAYS
check to ensure the
equipment and all parts are well secured and stable before each use.
ALWAYS
clear the area of any rocks, sharp objects, or any materials that could be potentially hazardous to
users.
Check that your chosen protective ground covering is maintained at a safe depth (at least 9 inches) and top
up/redistribute as necessary before using equipment.
DO NOT
attach items to the equipment that are not specifically designed for use with the equipment,
including, but not limited to, jump ropes, clotheslines, pet leashes, cables and chains, or any other swings
as they may cause choke hazards and the product is not designed for any of these components.
The steel, fabric and plastic parts used in your product are subject to normal wear. Gradual deterioration of
the material will occur, the speed of which will depend on the level of exposure to UV rays, airborne
pollution, outdoor weather conditions such as rain and wind and the amount of use. You must inspect the
equipment prior to every use. This includes, but is not limited to inspecting the equipment for cracks,
excess wear, missing parts, loose connections, and for overall integrity. When the equipment shows any
signs of weakness, you must stop using the swing immediately, properly store the equipment or restrict
access by users until the condition is resolved.
Verify that the suspended chains are secured at both ends and tightened so that there are no loose chains
hanging which could result in a choking hazard.
For replacement parts call Zero Gravity customer services on 01264 771247 or visit
www.ZeroGravityTrampolines.com
Anchoring
This product
MUST
be anchored into the ground to prevent movement and to make the swing more stable
during use.
It is highly recommended that you seek the opinion from a local licensed contractor on the best way to
secure the swing in your location. The best way to anchor a product is to create a concrete footing and use
that as a base for an anchor. Whatever method you prefer for your location, an anchoring system for this
product should be used at all times.
