background image

18

Product Warranty

Zero Gravity warrants its products to be free from defects in material and workmanship under normal use and

service conditions for three hundred and sixty five (365) days after the date of purchase.

All warranty coverage extends only to the original purchaser of the product and is not assignable or transferable.

The original store or online purchase receipt must be kept as proof of purchase in order for the warranty to be

valid. These documents must be presented in the event of making a warranty claim.

During  the warranty  period,  Zero  Gravity will  provide  repair  or  replacement  of  defective  equipment  or  parts

thereof covered by the warranty. Any handling, transportation, delivery and other incidental charges in respect

of  the  servicing  of  the  equipment  shall  be  borne  by  the  Purchaser. If  the  product  includes  a  number  of

accessories, only the defective part or accessory will be replaced.

The  warranty  will  become  void  if  any  defects  or  damages  are  associated  with  the  use  of  unauthorised

replacement parts. All replacement parts must be obtained from authorized Zero Gravity agents.

All  decisions made  by  Zero  Gravity made  in  respect  of  the  servicing  of  the  equipment  (including  repairs,

replacements or issues relating to defects of workmanship or materials) shall be conclusive and the Purchaser

agrees  to  be  bound  by  such  decisions. Any  defective  equipment  or  part  thereof  replaced  shall  become  the

property of Zero Gravity.

In the event of a product or accessory being replaced during the guarantee, the guarantee on the replacement

will expire at the original date, i.e. 365 days from the original purchase date.

This  warranty  excludes  defects  caused  by  the  product  not  being  used  in  accordance  with  instructions,

accidental damage, misuse or being tampered with by unauthorised persons.

The Zero Gravity Warranty does not cover:

a) Products used for commercial or rental purposes.

b) Loss or damage to product due to:

i.

Abuse, repairs and/or tampering by any person other than the authorised personnel of Zero

Gravity

ii.

Negligence and/or misuse (including foreign objects, accidents, improper storage, exposure to

sun/moisture, excessive temperature, sand, dust, dirt, other pollution or other environmental

conditions and failure to follow precautions or proper operating instructions stated in the

Assembly, Installation, Care, Maintenance and Use Instructions such as improper installations)

iii.

Fire, flood, lightning strike, wind storm or other acts of God

iv.

Freight or improper transport damages, and

v.

Improper usage (including use by underage, overweight or excessive number of users permitted

as stated in the Assembly, Installation, Care, Maintenance and Use Instructions).

c) Defects, damages or accidents due to the malfunction, connection to or use of non-Zero Gravity or

unauthorized parts. In such event, Zero Gravity reserves the right to cancel the Limited Warranty coverage

immediately.

To the extent allowed by the applicable local law, the remedies in the Limited Warranty are the Purchaser’s sole

and exclusive remedies.

Summary of Contents for UFO






















Reviews: