7.
Defrosting
Frost will gradually accumulate on the refrigerator
’s interior surface.
It must not be allowed to grow thick as it acts as an insulator and adversely affects refrigerator
performance.
Check the formation of frost regularly and when it gets to around 5mm thick, defrost the
refrigerator.
To defrost the refrigerator, turn it off and remove all fridge contents.
Warning:
Normally the temperature of items would rise unduly during defrosting so alternative cooling
must be used.
Do not try to accelerate defrosting by using any kind of heating appliance, or sharp object, as
this might damage the plastic surface of the refrigerator.
Once defrosting is finished, empty out the drip tray and thoroughly clean the interior.
Prolonged Storage
Disconnect all electrical connections and the gas supply.
Empty the refrigerator. Defrost and clean it thoroughly as described earlier.
Leave the door partially open to exclude any odors and mildew forming.
Important
Before using the refrigerator again, ensure that no foreign bodies are present in the chimney,
burner (dust, insects, nests, etc.) or in the Gas Regulator.
Warning: (This refers to the absorption Cooling Unit on the back of the Refrigerator)
The needle valve screw used for admitting the ammonia/hydrogen filling charge to an
absorption unit is fitted to the unit’s reservoir. It is a strictly applied provision of the guarantee
extended on the unit to the customer, that any interference with the filling valve screw will
automatically void the guarantee. The absorption unit must not be opened, since it contains
corroding chemicals under high pressure
.
Who to Contact
For service of your Zero refrigerator, please firstly contact your selling agent.
Summary of Contents for GR265G
Page 7: ...5...
Page 8: ...6 Electrical Diagram...
