2.
Data Plate
The data plate, located on the back of the refrigerator will register your model number, serial number
and product number.
Record these details here, for easier access if the need for a service should arise.
Model Number ____________________________
Serial Number ____________________________
Product Number____________________________
Installation Instructions
Placement of the Refrigerator
The room should have a capacity (length x width x height) of at least 20m³ and must be adequately
ventilated as well as follow all relevant national and local regulations.
Further, the room should have a window (which can be opened) . It is important that the refrigerator is
not subject to radiation of heat from a stove etc.
For best performance also at high ambient temperatures, there must be free air circulation over and at
the rear of the refrigerator.
The refrigerator is designed for a free-standing installation and the clearance to the rear wall and to
the possible side walls, should be at least 50mm. The clearance above the refrigerator should be at
least 600mm.
NB:
The refrigerator must be adjusted to a vertical and horizontal level position, see bubble spirit
level supplied with the refrigerator. Use the feet on the refrigerator to adjust its position.
Controls
Description of Controls:
A. Temperature Controller (Located at the back of the appliance)
B. Piezo Ignitor
C. Flame Indicator
D. Flame Failure Device
E. Gas Thermostat
Summary of Contents for GR265G
Page 7: ...5...
Page 8: ...6 Electrical Diagram...
