Zernike FlashGRILL Evolution, Use And Maintenance Manual

Page: 4 / 24

- 4 -
Ed.1 05/2017
EN
- Read this manual carefully. It provides the user with important information on safety
during all the operations described in this document.
- Please preserve this manual with care in a protected place. In case you lose the pre-
sent copy, a new copy can be requested to the Manufacturer.
- The Manufacturer of this device cannot be held responsible for any damage caused by
a failure to comply with the obligations stated in this manual.
Before operating the machine read the instructions reported in this manual
and make sure to follow them carefully. Please preserve the present manual
and all the documents attached to it in safe and accessible place.
- This document assumes that the facilities where the device is installed comply with all
required rules on safety and health at work.
- The instruction, the drawings and the documents included in the present manual are
exclusive propriety of the Manufacturer and cannot be reproduced in any way, nor
entirely nor partially.
- The Manufacturer reserves the right to improve and/or modify the product. The Manu-
facturer guarantees that the present Manual reflects the state of the art at the time of
the sale of the device.
- We kindly invite the customers to communicate us any proposal for improvement of
both the product and the Manual.
1.0 - INTRODUCTION
1.1 - GUIDELINES ON HOW TO READ THE PRESENT MANUAL
In order to facilitate the understanding of the text, terms abbreviations and pictograms are
used.
The Manual is constituted by a cover, an index and series of chapters. Chapters are num-
bered progressively. The page number is at the bottom of the page.
UNITS OF MEASUREMENT
The units of measurement are those adopted by the International System of Units (SI).
PICTOGRAMS
The descriptions preceded by these symbols contain important information and prescrip-
tions, particularly with regard to safety. Failure to respect them can lead to:
- Dangers to the user’s safety;
- Injury, also serious (is some cases also death)
- Invalidation of the product warranty;
- The refusal of any liability by the Manufacturer
DANGER symbol used in case of danger of serious permanent injury, which
requires hospitalization, and may be fatal in the most extreme cases.