Zernike FlashGRILL Evolution, Use And Maintenance Manual

Page: 10 / 24

- 10 -
Ed.1 05/2017
EN
6.4 - PRESET COOKING PROGRAMS
6.5 - CHANGE PRESET COOKING PROGRAMS
The equipment has 3 preset cooking programs.
1. Preset program at 220°C
2. Preset program at 235°C
3. Preset program at 255°C
To select the desired program, press the icon on the
console.
The hotplate resistance will function until you reach
the set temperature.
When the temperature is reached the led in the lower
right of the display turn off (9). When the LED is lit,
the resistors are heating up the plate.
The operator can intervene in the preset programs by
setting a new temperature.
Select the preset program (e.g. 1 to 220°C): the icon
lights up.
To change the temperature selected with the buttons
decrease (5) or increase (6); e.g. 230°C.
NOTE: The 5 and 6 buttons allow to increase or
decrease the values of 3 units if held down.
NOTE: The temperature range can be set from 40°C
to 260°C.
To assign a new temperature to the preset program,
press the program icon until the acoustic signal con-
firmed that the new value is saved.
Henceforth the preset value for the supporting
program will be that set by ‘operator (e.g. Supporting
program 1 = 230°C).
NOTE: After the activation of a preset program,
the 3 program buttons (1,2,3) are deactivated for 2
seconds; this prevents to press them by mistake.
After 2 seconds the buttons will reactivate again.
1 2 3
1 2 3
5 6
9