Zepter TUTTOLUXO 2S, Operating Instructions Manual

Page: 17 / 22

EN 15
5
3
4
2
1
MoTor iNTAKE FiLTEr
Designed to prevent various particles (from carpets, dust or dirt present
in the air) from reaching the motor. It is also used to filter the motor
cooling air, a unique function to be found only
in TUTTOLUXO 2S.
1. Check that the aspirating filter is clean, and
therefore efficient, at least once a month, if you
use the vacuum cleaner daily. (Pict. 3)
2. If needed, remove and rinse the aspirating
filter frequently. To remove it, it is necessary to
first take off the tank and so avoid that, on
turning the appliance over, water is spilled
on the motor fan.
Find the lower cover and remove it by undoing
the central screw, simply using your hands or a
coin.
Remove the filter (Pict. 4-5) and wash it with
water and neutral detergent.
Before using the vacuum cleaner again, it is
important that the filters are dry, so that they can
operate at their best.
Do not leave the motor intake filter to dry on
heaters or radiators!
PoLYEsTEr FiLTEr
In order to keep the filter always clean and ready for maximum performance, it
should be inspected montly.
To inspect the filter, proceed in the following way:
1) Remove the grilled cover at the back of the TUTTOLUXO 2S (Pict. 1).
The polyester filter is fitted inside. Place the grilled cover on the floor and
extract the filter as shown (Pict. 2).
2) Check the filter state; if there are traces of dust or dirt, wash with plenty of
cold water and neutral detergent to remove.
3) Allow the filter to dry naturally (not on radiators or heaters). Do not use the
appliance until the filter is perfectly dry. Use of a damp filter could
damage the appliance.
4) After cleaning, put the filter back into place and reassemble the cover,
making sure to properly fit the grilled cover hooks onto the slits on the
appliance body. Once the grilled cover is in place, rotate it upwards for the
final fixing with the stopping tongue.
After some periods of use, should the polyester filter be torn or damaged, it
should be replaced with a new one from the Zepter Service Centre.
HEPA FiLTEr * oPTioNAL
High Efficiency Particulate Air
The HEPA filter technology assures maximum efficiency of 99.97% particle
capture down to 0.3 microns. The HEPA filter also helps to eliminate micro-
organisms in indoor air.
In order to keep the filter always clean and ready for maximum performance, it
should be inspected montly.