Zepter PWC-200, Operating Instructions Manual

Page: 9 / 22

EN 7
1 2
6
3 5
4
6 - GETTING STARTED
Water level
First, remove the upper protection and unpack the machine.
WArNiNG!
Remove and dispose of plastic bags and/or keep them out of reach
of children.
WArNiNG!
Make sure the power cord is not plugged in before you start any operation.
Place the appliance on the floor and open the tank lid as shown in Pict.1 and 2.
WArNiNG!
For safety reasons, never vacuum, for any reason, toxic or highly flammable
substances, explosives, embers or lit up cigarettes, detergents or foam of any
kind. Do not use the appliance to clean the chimney or the uptake or to remove
oily substances. This could lead to serious danger and to a possible machine
breakdown!
CAUTioN!
Before you turn on the machine, for sucking up solids, remove the top of the
bucket (Pict.3) and fill it with cold water (pict. 4), up to the level corresponding
to the mark printed on the separator "livello H
2
O" (Pict. 5). The tank can be
removed for filling, if required (Pict. 6). Close the tank lid and refasten it. Now
you can connect the appliance to the mains.
Maintenance:
•
Always follow the instructions and keep your appliance in good working
condition.
•
Repairs must be performed only by a Zepter Service Centre and in accordance
with national and local safety regulations. Unauthorised repairs could cause
injury or machine damage. The manufacturer cannot be held responsible for
unauthorised work.
Disposal:
•
At the end of its lifecycle, we recommend making the machine safe by
cutting off the power cord. Do so only after unplugging it from the mains!
Do not dispose of the machine as ordinary rubbish, but leave it with
personnel, qualified to collect such material. In this way it will be properly
disposed of and recycled. This is a valuable aid for safeguarding our
environment!
•
Save these instructions for future referral!