19
Tornado II & Tornado III Use, Care, and Installation Guide
ZEPHYRONLINE.COM
Features & Controls
RF Remote Control
FCC Caution
To assure continued compliance, any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this equipment. (Example -
use only shielded interface cables when connecting to computer or peripheral device. This device
complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions. (1)
This device may not cause harmful interference, and (2) This device must accept any interference
received, including interference that may cause undesired operation.
Synchronization
To create a unique link between your hood and remote control please follow these steps.
1. With hood off, press and hold the “lights” button on the hood until the letter “F” shows on the
display screen.
2. Press on the remote, the lights on the hood will turn on and synchronization is complete.
RF Remote Control Functions
Blower On / Speed Selection
Press to power on blower and cycle through all three blower speeds.
Blower On / Power Off
By pressing , the blowers will power on at the last speed setting. Press
again and the entire hood will power off, including lights.
Delay Off
Lights Low/Medium/High/Off
Switch lights to low by pressing once, pressing two times for medium, three
times for high, and again to switch off.
Blower On/
Speed Selection
1
1
2
3
4
Blower On/
Power Off
2
5 Min Delay Off
3
Lights
Low/Medium/High/Off
4
By pressing , the blower and lights will enter Delay Off mode. A dot will
appear in the lower right corner of the hood display indicating the function
is on. The blower will change to speed 1 and shut down after 5 minutes.
