background image

21

Roma Pro Use, Care, and Installation Guide

ZEPHYRONLINE.COM

Maintenance

Hood & Filter Cleaning

Surface Maintenance

 

Do not use corrosive detergents, abrasive detergents or oven cleaners.

 

Do not use any product containing chlorine bleach or any product containing chloride.

 

Do not use steel wool or abrasive scrubbing pads which will scratch and damage surface.

Cleaning Stainless Steel

Clean periodically with warm soapy water and clean cotton cloth or micro fiber cloth. Always rub 
in the direction of the stainless steel grain. To remove heavier grease build up use a liquid degreaser 
detergent.

After cleaning use a non-abrasive stainless steel polish/cleaners, to polish and buff out the stainless 
luster and grain. Always scrub lightly, with clean cotton cloth or micro fiber cloth and buff in the 
direction of the stainless steel grain.

Cleaning the Baffle Filters

The stainless steel baffle filters are intended to trap residue and grease from cooking. Although the 
filters should never need replacing, they are required to be cleaned every 30 days or more often 
depending on cooking habits.  

Filters may be placed in dishwasher at low heat or soaked in hot soapy water  Dry filters and re-install 
before using hood.

Summary of Contents for Roma Pro ZRP-E36BS





























































Reviews: