4
TYPES OF INSTALLATION:
This wine refrigerator has been designed for free-standing or built-in
ŝŶƐƚĂůůĂƟŽŶ͘
In every case, there
must be adequate
ǀĞŶƟůĂƟŽŶ
and access for service
͘
Free-standing
/ŶƐƚĂůůĂƟŽŶ
A free-standing
ŝŶƐƚĂůůĂƟŽŶ
will allow you to install the wine refrigerator in almost any place you
desire
͘
You must follow the stated instruc
ƟŽŶ
s for electrical requirements and leveling the wine
ƌĞĨƌŝŐĞƌĂƚŽƌ͘
Built-in
/ŶƐƚĂůůĂƟŽŶ
A recessed installa
Ɵ
on will allow you to install the wine refrigerator under a counter or in a kitchen
cabinet provided the clearance space requirements around the wine refrigerator are
ĨŽůůŽǁĞĚ͘
It is
necessary to allow adequate ven
Ɵů
a
Ɵ
on space around the unit (make sure there is at least some
ǀĞŶƟůĂƟŽŶ
room for the back of the
ƵŶŝƚͿ͘
The following
ĂĚĚŝƟŽŶĂů
items must be observed:
1
͘
Place the wine refrigerator in front of the
ŝŶƐƚĂůůĂƟŽŶ
ůŽĐĂƟŽŶ͘
2
͘
Adjust the feet and place the unit
ŇĂƚ
on the
ŇŽŽƌ
or on a pl
ĂƞŽƌŵ
depending on your
ŝŶƐƚĂůůĂƟŽŶ
requiremen
ƚƐ͘
3
͘
If the electrical outlet for the wine refrigerator is behind the cabinet, plug in the beverage
ƌĞĨƌŝŐĞƌĂƚŽƌ͘
4
͘
Push the wine refrigerator into
ƉŽƐŝƟŽŶ͘
Installa
Ɵ
on Clearance Requirements:
When installing the wine refrigerator under a counter, follow the recommended spacing dimensions shown
͘
ͻ
To ensure proper service access and ve
ŶƟůĂƟŽŶ͕
allow between 1 - 2 inches of clearance at the back as shown in
the
ĚŝĂŐƌĂŵ͘
ͻ
The installa
Ɵ
on should allow the unit to be pulled forward for servicing, if necessary
͘
ͻ
A standard electrical supply (115 VAC only, 60 Hz), properly grounded in accordance with Na
ƟŽŶĂů
Electrical Code
and local codes and ordinances, is requi
ƌĞĚ͘
Warning: DO NOT install the wine
refrigerator behind a closed cabinet doo
ƌ͘
Important: Once you are ready to install the unit in a cabinet or directly on the
Ň
oor, you must adjust the
feet to level the wine refrigerator
͘
W
all
2-1/4”
Min.
ͻ
A
ŶŝŶƐƚĂůůĂƟŽŶŶĞdžƚƚŽĂǁĂůůǁŝůůƌĞƋƵŝƌĞĂŵŝŶŝŵƵŵϮͲϭͬϰ͟ĚŽŽƌĐůĞĂƌĂŶĐĞƚŽĂĐĐŽŵŽĚĂƚĞƚŚĞŚĂŶĚůĞ͘
1”- 2”
