6
REMOVING THE GLASS SHELVES:
1. Open the door completely.
2. Make sure the shelf is pushed back completely.
3.
>ŝŌ
either the le
Ō
or right side of the shelf to create a 45° angle from its original
ƉŽƐŝƟŽŶ͘
Make sure not
to
ůŝŌ
either side of the shelf too hard as it may come in contact with the inner wall mount.
4. Pull the shelf outward un
Ɵ
l it is removed from the inner compartment. You may encounter some
resistance from the shelf guard rail.
Tip: To prevent damaging the door gasket, make sure to open the door fully before pulling the shelves out
of their track.
Note: The refrigerator may experience decreased cooling e
ĸ
ciency if air
ŇŽǁ
is restricted due to a fully
loaded cabinet.
REMOVING THE WOODEN SLIDE SHELVES:
1. Open the door completely.
2. Remove all of the contents loaded on the shelf, if applicable.
3. Pull the shelf towards yourself
ƵŶƟů
it is fully extended outward.
4. The shelf has
ƉůĂƐƟĐ
posts on both sides as indicated in the diagram below. While facing the unit, press
the
ƉůĂƐƟĐ
post on the right side down while pulling up on the le
Ō
plas
Ɵ
c post. You may choose to do this
by hand or by using a
ŇĂƚŚ
ead screwdriver.
5. Evenly pull out the shelf from the track
ƵŶƟů
it is completely removed from the inner compartment.
