7
Reversing Door Handle Placement
REVERSING THE DOOR:
WARNING:
Disconnect power before removing doors.
Note:
ŽŽƌƌĞǀĞƌƐĂůŽƉĞƌĂƟŽŶƌĞƋƵŝƌĞƐĂƚůĞĂƐƚƚǁŽƉĞƌƐŽŶƐ͘
7
7
4
3
2
3
2
1
1
4
5
6
8
2
5
1. Open the door and using a Phillips screwdriver, remove the bottom screws from the lower hinge.
2. Remove the door and place it in a safe place.
3. Remove the door axix and bushing from the lower right hinge.
4. Remove 3 screws from the lower right hinge. Place the lower right hinge in a safe plate in case you need to
reverse the door in the future. Remove the decorative screws from the lower left hinge corner. Install the
lower left hinge. Insert the decorative screws into the lower right corner.
5. Remove the screws from the upper right hinge. Place the upper right hinge in a safe place in case you
need to reverse the door in the future. Remove teh plastic caps from the upper left hinge corner. Install the
upper left hinge by fastening the screws through the left hinge to the cabinet. Insert the plastic caps to the
upper right hinge.
6. Unscrew 2 screws at the bottom of the door and remove the Reed Switch, then install the Reed Switch at
the top of the door frame.
7. Install the door axis and busing on the lower left hinge.
8. Carefully insert the door into the upper left hinge, then slide the door on top of the lower hinge and
secure the door by installing the lower screws.
