16
PRB24C01CBSG Use, Care, and Installation Guide
B E V E R A G E
C O O L E R
S I N G L E Z O N E
P R E S R V ™
Installation Instructions
Installation Clearance Requirements
When installing the beverage cooler under a counter, follow the recommended spacing dimensions
shown.
Ź
For proper clearance of the electrical plug, allow at least 1” of clearance at the back as shown in
the diagram.
Ź
An installation next to a wall will require a minimum 2-1/4” door clearance to accommodate the
Zephyr handle.
Ź
The cabinet should allow at least 24” for the width and 34” for the height to accommodate the
beverage cooler.
Ź
The power cable is located on the back right of the unit and has a length of 72” to accommodate
multiple outlet locations.
Ź
Once you are ready to install the unit, you must adjust the feet to level the beverage cooler.
Ź
This refrigerator can be fully built-in to cabinetry and does not require any additional clearances
besides what is referenced below.
Ź
The installation should allow the unit to be pulled forward for servicing, if necessary.
2-
1/4
” Min.
24” Min.
34” Min.
1” Min.
