26
PRB24C01BG Use, Care, and Installation Guide
B E V E R A G E
C O O L E R
S I N G L E ZO N E
P R E S R V ™
Care and Maintenance
Normal Sounds
Your new beverage cooler may make sounds that are not familiar to you. Most of the new sounds are
normal. Hard surfaces like the floor or walls can make the sounds seem louder than they actually are.
The following describes the kinds of sounds that might be new to you and what may be making them.
►
Rattling noises may come from the flow of the refrigerant or the water line.
►
Items stored on top of the beverage cooler can also make noises.
►
The high efficiency compressor may make a pulsating or high-pitched sound.
►
Water running from the evaporator to the water bin may make a splashing sound.
►
As each cycle ends, you may hear a gurgling sound due to the refrigerant flowing in your
beverage cooler.
►
You may hear air being forced over the condenser by the condenser fan.
Cleaning the Unit
Periodic cleaning and proper maintenance will ensure efficiency, top performance, and long life.
Interior Cleaning
1. Disconnect power to the unit.
2. Open the door and remove the contents and shelves.
3. With a clean cloth, wipe down the interior of the unit.
4. Reinsert the shelves and beverages.
5. Reconnect power to the unit.
Exterior Cleaning
The door and cabinet may be cleaned with a mild detergent and lukewarm water solution such as
two (2) tablespoons of baking soda to one (1) quart of water. Do not use solvent based or abrasive
cleaners. Use a soft sponge and rinse with clean water. Wipe with a soft clean towel to prevent
water spotting. If the door panel is stainless steel, it can discolor when exposed to chlorine gas and
moisture. Clean stainless steel with a cloth dampened with a mild detergent and warm water solution.
Never use an abrasive or caustic cleaning agent.
