5
LEVELING:
The beverage cooler should be installed on a
Į
rm and level surface that will be able to support the
e
ŶƟƌ
e weight of a fully loaded unit. It is important for the beverage cooler to be leveled in order to
work properly. It can be raised or lowered by rota
ƟŶŐ
the
ƉůĂƐƟĐ
sheaths around each of the feet on the
ďŽƩŽŵ
of the machine. If you
ĮŶĚ
that the surface is not level, rotate the feet
ƵŶƟů
the beverage
cooler becomes level. You may need to make several adjustments to level it. We recommend using a
carpenter’s level to check the machine. Turn the leveling feet to the right to lower that side of the
cooler. Turn the leveling feet to the le
Ō
to raise that side of the cooler.
RECOMMENDED GROUNDING METHOD:
For your personal safety, this appliance must be grounded. It is equipped with a power supply cord having a
3-prong grounding plug. To minimize possible shock hazard, the cord must be plugged into a ma
ƟŶŐ
3-
pronged wall socket, and grounded in accordance with the N
ĂƟŽŶĂů
Electrical Code and local codes and
ordinances. If a ma
ƟŶŐ
wall socket is not available, it is the personal responsibility of the customer to have a
properly grounded, 3-prong wall receptacle installed by a quali
Į
ed electrician.
Before you move your beverage cooler into its
ĮŶĂů
ůŽĐĂƟŽŶ͕
it is important to make sure you have the
proper electrical
ĐŽŶŶĞĐƟŽŶ͘
A standard electrical supply (115 V, 60Hz), properly grounded in accordance
with the N
ĂƟŽŶĂů
Electrical Code and local codes and ordinances, is required. It is recommended that a
separate circuit, serving only your beverage cooler, be provided. Use receptacles that cannot be
turned
Žī
by a switch or pull chain.
The fuse (or circuit breaker) size should be 15 Amps.
Installing Your Door Handle and Shelves
INSTALLING THE DOOR HANDLE:
1. Open the door and carefully pull the door gasket around the area where the handle is to be installed.
2. Insert each Phillips head screw through the gasket side of the door un
Ɵ
l the screw passes through the
door.
3. Align the handle with the screws and
Ɵ
ghten using a Phillips head screwdriver
ƵŶƟů
the handle is
ŇƵƐŚ
against the door frame.
ĂƵƟŽŶ͗
Do not over-
Ɵ
ghten the screws as this may cause damage to the handle or to the stainless steel
door.
4. Carefully press the door gasket into its original
ƉŽƐŝƟŽŶ͘
Electrical Shock Hazard!
Plug into a grounded 3-prong outlet.
Never remove the grounding prong from the plug.
Never use an adapter to bypass the grounding prong.
DO NOT use an extension cord.
Failure to follow these instr
ƵĐƟŽŶƐ
can result in
Į
re, electrical shock, or personal injury.
