11
Installation –
Mounting the Hood
FIG. G
1
Top Duct Covers
Top Support Frame
Bottom Duct Covers
Bottom Support Frame
9. Assemble Top Duct Covers (with louver holes) together over Top Support Frame, secure Top Duct Covers
together by magnetic strips.
Note:
If using hood in ductless recirculating mode you must install the air
diverter plate to the Top Support Frame prior to assembling the duct covers. Turn to page 12 for more
details.
10. Secure Top Duct Covers to Top Support Frame by using (4) 3/16 x 1/4 screws (2 screws for each Top Duct
Cover). (FIG. G1).
11. Assemble Bottom Duct Covers together over Top Duct Covers and secure together by magnetic strips.
Bottom Duct Covers should rest on top of the Hood Body.
Summary of Contents for brisas BML-E30BG
Page 2: ......
