Zephyr AIN-M80AWX, Installation And Use Instruction

Page: 17 / 64

- 17 -
INSTALLATION INTERNAL
BLOWER
NOTE: The following instructions are for
installing the internal blower only.
Install this range hood only with internal blower
model CBI-290A or CBI-600A.
1. Remove the knockout (B). Fig. 13.
2. Fix the internal blower with (4) mounting
screws (supplied with the internal blower).
Fig. 13.
(4) MOUNTING SCREWS
(Supplied with the motor)
CHOOSE AIR OUTLET
LOCATION
The hood is supplied with upper air outlet;
but you can let the air out the back, turning
the motor plate.
Rotation of the motor plate:
1.Remove the motor plate unscrewing (6)
screws (Fig.11).
2.Rotate the motor plate and re-fix in the new
position (Fig.12).
In the installation with internal blower, use
the rond knockout (B);
in the installation with remote or In-line
blower, use the other knockout (A).
FIG.11
FIG.12
FIG.13
KNOCKOUT
(B)
KNOCKOUT
(A)
KNOCKOUT
(B)