with these signs. The effectiveness of signs should not be diminished by too many signs being placed together. Any
pictograms used should be as simple as possible and contain only essential details.
Disposal of equipment using flammable refrigerants
See national regulations.
Storage of equipment/appliances
The storage of equipment should be in accordance with the manufacturer’s instructions.
Storage of packed (unsold) equipment
Storage package protection should be constructed such that mechanical damage to the equipment inside the package
will not cause a leak of the refrigerant charge. The maximum number of pieces of equipment permitted to be stored
together will be determined by local regulations.
OTHER CAUTIONS
1.
PLEASE MAKE SURE THE PRODUCT VENTILATES ALL THE TIME! Please make sure the inlet and outlet
ventilation is not blocked at all times.
2.
Operate this unit on a horizontal surface to avoid water leakage.
3.
Do not operate this unit in an explosive or corrosive atmosphere.
4.
Operate this unit in an ambient of 35 degree centigrade or less.
5.
Clean air filter periodically to enjoy the most efficient cooling.
6.
When the unit is shut off, please wait at least 3.5 minutes before restarting this is to prevent the compressor from
being damaged.
7.
This unit needs at least 7A of electricity to have its compressor operational. To avoid the household electricity block
out, please do not use any extension cord for this unit.
8.
This unit is for indoor cooling and dehumidifying.
9.
In order to dispose the appliance safely, please remove the batteries from the unit
before scrapping it.
ATTENTION!
For effective cooling functions, please ensure that the following steps are undertaken:
Extend the exhaust hose to a length of not more than 400mm. The exhaust hose must
be kept parallel and must not be bent up or down.
A distance of 500mm minimum must be kept between the filter side of the unit and wall
or any other obstacles.
