68
Installing the RAM Board
The RAM board slot is located under the memory board cover, as
illustrated in the figure.
1. Turn off the power and remove all connecting cables.
2. As you face the computer, turn the system over so the bottom of
the system is facing up.
3. Use a screw driver to free the cover. Take the cover off and set it
aside.
4. Hold the RAM board gently by its edges.
5. Insert the RAM board into the slots as shown in the figure. Press
down gently.
Caution:
Whenever you work inside the computer, electrostatic discharge can permanently
damage your equipment. Always ground yourself by touching the metal portion of the
rear panel before beginning these procedures. We strongly recommend using an
antistatic wrist strap attached to the “FG Terminal” on the left side of the rear panel.
See illustration in Chapter 2, Back View.
Memory Board Location (cover removed)
RAM Board
Chapter 6 - How to Install Options
