(844) 200-1945 |
Page
5
of
37
Copyright © Zenty AV
1. Camera Installation
1.1
–
Camera Introduction
1.2
–
Power-on Initial Configuration
1. Power-on: Connect DC 12V power supply adapter with power supply socket
2. Initial Configuration: The remote-control receiving indicator flashes after power on, the pan-tilt turns
left to the lowest left to the lowest, and then turns to the HOME position (both horizontal and vertical
positions are in the middle), while the movement first shrinks and then stretches. When remote-control
receiving indicator stops flashing, the self-checking is complete.
Notes:
1. After power on and self-
checking, the camera will automatically return to the preset 0 position if it’s
pre-set.
2. The default address for the IR remote control is 1#. If the menu restored to factory defaults, the
remote-control default address will restore to 1#.
Summary of Contents for 153
