background image

2

English

SAFETY FIRST

Instructions contained in warnings
within this manual marked with a

symbol concern critical points

which must be taken into
consideration to prevent possible
serious bodily injury, and for this
reason you are requested to read
all such instructions carefully and
follow them without fail.

WARNINGS IN THE MANUAL

This mark indicates instructions
which must be followed in order to
prevent accidents which could
lead to serious bodily injury or
death.

This mark indicates instructions
which must be followed, or it leads to
mechanical failure, breakdown, or
damage.

This mark indicates hints or
directions useful in the use of the
product.

NOTE

IMPORTANT

WARNING

Contents

1. Parts location ............................3
2. Explanation of pictorials............4
3. Symbols on the machine ..........4
4. Safety precautions ....................5
5. Set up .....................................13
6. Fuel and chain oil....................16
7. Operation ................................17
8. Maintenance ...........................21
9. Troubleshooting guide ............27

10. Specifications..........................28

中   文

安全第一

本说明书上记载的注意事项以及机器上
贴着的带有    的警告标签,是表示有
发生人身事故危险的重要项目,务请认
真阅读并严格遵守。

■关于警告标志

表示如不遵守注意事项,便可能导致重
伤或死亡。

表示如不遵守注意事项,有可能致使机
器损伤或发生故障。

表示其他使用上必要的补充说明。

目   录

  1.  各部分的名称  ....................................3
  2.  警告标签及用法 .................................4
  3.  操作装置符号  ....................................4
  4.  正确使用须知 .....................................5
  5.  组装 ......................................................13
  6.  燃料 ......................................................16
  7.  操作方法 .............................................17
  8.  检修 ......................................................21
  9.  故障排除指南 ..................................27
 10.  产品主要数据 ..................................28

警   告

重   要

补   充

Summary of Contents for PSJ2300





























Reviews: