Zenoah G3700 Owner'S Manual Download Page 3 | Manualshive

Page: 3 / 15

Zenoah G3700 Owner'S Manual Download Page 3

G3700

G

B

GB-3

Contents

1.

For Safe Operation ................................................................... 4

2.

Explanation of Symbols on the Machine .................................. 6

3.

Installing Guide Bar and Saw Chain ......................................... 7

4.

Fuel and Chain Oil .................................................................... 8

5.

Operating the Engine ............................................................... 9

6.

Sawing .................................................................................... 11

7.

Maintenance ........................................................................... 12

8.

Maintenance of Saw Chain and Guide Bar ............................ 13

9.

Troubleshooting Guide ........................................................... 14

10.

Disposal .................................................................................. 14

11.

Specifications ......................................................................... 15

Masahiko GOUDA
General Manager, Quality Assurance Department

DECLARATION OF CONFORMITY TO MACHINES DIRECTIVE

(Directive 98/37/EC, 89/336/EEC)
and to the regulations governing transposition
Internal control production

MANUFACTURER :

ZENOAH CO., LTD.

No. 9, 1-Chome

MINAMIDAI, KAWAGOE City

SAITAMA, JAPAN

DECLARES THAT THE DESIGN OF THE MACHINE DESCRIBED BELOW:

Model

: G3700

Serial no.

: 600101 and up

Make

: ZENOAH CO., LTD.

CONFORMS TO THE REQUIRMENTS OF THE MODIFIED MACHINES DIRECTIVE
(Directive 98/37/EC) AND TO THE NATIONAL REGULATIONS GOVERNING ITS
TRANSPOSITION ABROAD : AND

THAT IT HAS BEEN ISSUED WITH A “CE”CERTIFICATE, NO. U3 2692468 01 BY
TÜV Rheinland Group - TÜV Rheinland InterCert kft. Product Certification - H - 1061
Budapest Paulay Ede u. 52 - HUNGARY

Signed in Saitama, Japan

1st April 2006

«
1
2
3
4
5
...
»

Summary of Contents for G3700
















Reviews:

No comments