Zenoah EBZ8550, Operator'S Manual, Page: 8 / 44

Safety instructions for maintenance
WARNING: Read the warning instructions
that follow before you use the product.
• Your warranty may not cover damage or liability
caused by the use of non-authorized accessories or
replacement parts.
• The inside of the muffler contains chemicals that
may be carcinogenic. Avoid contact with these
elements in the event of a damaged muffler.
• Stop the engine before assembling or dismantling
accessories or other parts.
• Check that the thick round pin in the clamp is
inserted in the strap. If it is inserted incorrectly it may
lead to personal injury.
Assembly
Introduction
WARNING: Read and understand the safety
chapter before you assemble the product.
To assemble the tube and handle on
the product
1. Attach the flexible hose (A) to the pipe angle and the
control pipe (B) with the clamps (C), (D).
B
D A
C
Note: Lubricate the control pipe and the flexible hose
to make them more easy to assemble.
2. Attach the handle (E) to the control pipe and put the
knob through the handle.
E
3. Tighten the knob.
4. Attach the cable to the flexible hose with the cable
clamp.
5. Attach the intermediate pipe to the control pipe.
6. Attach the blower nozzle to the intermediate pipe.
To adjust the harness
A correctly adjusted harness and product makes
operation easier.
1. Put on the harness of the product.
8 1321 - 001 - 09.09.2019