background image

English

6. MAINTENANCE 

F13

F14

3. Check if the safety lock returns to

its original position when you
release your hand from safety
lock.

If you find any defects at the checks
above, contact your nearest servicing
dealer for repair.

ANTI-VIBRATION SYSTEM (F13)

The deformed or damaged anti-
vibration system may cause of the
breakages like getting rickety or
falling off of engine and/or blade.

• [HTZ7510] Check periodically if

the rubber cushions are not
deformed or damaged.

• [CHTZ6010] Check periodically if

the springs are not deformed or
damaged.

AIR CLEANER (F14)

Release the air cleaner cover and
remove dusts. 
If the element is dirty, clean it by
tapping it or by blowing away the dirt
with air.
If the element is deformed or
damaged, replace it with new one.
After you have cleaned the element,
attach the element to the cleaner
body with the stamp towards the
outside (towards the cleaner cover).
After that, attach the cleaner cover.

Clogged air cleaner spoils engine
performance. Also, operation with no
element or with deformed or
damaged element causes irregular
wear outs of the engine mechanism.

IMPORTANT

WARNING

19

Summary of Contents for CHTZ6010

























Reviews: