Zenoah BCZ5050DW Owner'S Manual Download Page 8

BCZ5050DW

8

5. For safe operation

and cold may produce whitefinger
disease (Raynaud's phenomenon),
which symptoms are tingling and
burning sensations followed by loss of
color and numbness in the fingers.
All factors which contribute to
whitefinger disease are not known, but
cold weather, smoking diseases or
physical conditions as well as long
periods of exposure to vibration are
mentioned as factors. In order to
reduce the risk of whitefinger disease,
the following precautions are strongly
recommended.

a: Keep your body warm. Never use the

product during rains.

b: Wear thick anti-vibration gloves.
c: Take more than 5 minutes of break in

warm place frequently.

d: Maintain a firm grip at all times, but do

not squeeze the handles with constant,
excessive pressures.

e: If you feel discomfort, redness and

swelling of your fingers or any other
part of your body, see a doctor before
getting worse.

MAINTENANCE

1. In order to maintain your product in

proper working order, perform the
maintenance and checking operations
described in the manual at regular
intervals.

2. Always be sure to turn off the engine

and disconnect the spark plug before
performing any maintenance or
checking procedures.

The metallic parts and engine cover
reach high temperatures immediately
after stopping the engine.

3. Examine the product at intervals for

loose fasteners and rusted or damaged
parts. Use special care around the fuel
line, the muffler, and the ignition wiring.

4. When replacing the any other part, or

any lubricant, always be sure to use
only ZENOAH products or products
which have been certified by ZENOAH
for use with the ZENOAH product.

WARNING

5. In the event that any part must be

replaced or any maintenance or repair
work not described in this manual must
be performed, please contact a
representative from the store nearest
ZENOAH authorized servicing dealer
for assistance.

6. Do not use any accessory or

attachment other than those bearing
the ZENOAH mark and recommended
for the unit.

7. Under no circumstances should you

ever take apart the product or alter it in
any way. Doing so might result in the
product becoming damaged during
operation or the product becoming
unable to operate properly.

DISPOSAL

When disposing your machine, fuel or oil
for the machine, be sure to allow your
local regulations.

Summary of Contents for BCZ5050DW

















Reviews: