-
19
-
1.
Switch the remote control to
【
User Mode
】
。
2.
Select Group
:
Press any button of
「
」、「
」、「
<
」、「
>
」
to move cursor [ ]
to
the target group channels G1 ~ G4 which needs to be executed. The
ZEN16SA remote control provides up to 4 groups to perform.
3.
Enter group setting
:
Press
【
Enter
】
for 3 seconds to enter group setting.
Set Group Control
Press
【
Enter
】
for 3 sec.
Select group
Select target group,then the
selected group channel is flash.
Press any of them
to move cursor
Enter group setting
Press
【
Enter
】
for 3 seconds
until the group icon G2~G4
disappear, and G1 is flash.
