Technical Support:
8
ETS PARAMETERISATION
Figure 2.
Configuration
This tab shows the following parameters:
Buttons
[
enabled
]
1
: read-
only parameter to make it evident that the “Buttons”
tab is always enabled in the tab tree on the left. See section 2.2 for details.
Display
[
enabled
]: read-
only parameter to make it evident that the “Display”
tab is always enabled in the tab tree on the left. See section 2.3 for details.
Inputs
[
disabled
/enabled
]
: enables or disables the “Inputs” tab in the tree on
the left, depending on whether the device will or will not be connected any
external accessories. See section 2.4 for details
Thermostat
[
disabled
/enabled
]
: enables or disables the “Thermostat” tab in
the tree on the left. See section 2.5 for details.
1
The default values of each parameter will be highlighted in blue in this document, as follows:
[
default
/rest of options
].